D-Link DWL2700 AP Firmware Release Notes


Firmware: v2.10eu-r0164
Hardware: WAPD23 REV-A1
Date: Sep. 20, 2006

Problems Resolved:
1.	Reclassify the log info for auth and deauth message.


Firmware: v2.10au-r0158
Hardware: WAPD23 REV-A1
Date: Sep. 06, 2006

Problems Resolved:
6.	Show WMM settings in WEB
7.	Wizard channel setting is disabled when auto-channel scan enabled.
8.	Fix setting key method as ASCII by web, after reboot, it will become HEX.
9.	AP Client share key authentication can be used for all key indexes.
10.	WPA group key update interval is assigned range from 15 sec to 9999999 sec.


Firmware: v2.10au-r0128
Hardware: WAPD23 REV-A1
Date: Aug. 08, 2006

Problems Resolved:
1.	Use TFTP command to download F/W error. After reboot AP, if WDT doesn't finish initialization and use CLI command to access flash right away, AP will reboot system.
2.	Customer reported that STA can't connect to AP in WPA-EAP when the authentication user name length in STA is more than 32 characters. AP didn't forward the EAPOL packets to radius server correctly.
3.	When snmp disabled, set is not allowed.
4.	Once upload config file to device, the device rebooting issue was fixed.
5.	Change username length from 12 to 64(D-Link new requirement) (from CD)

Enhancements:
1.	Add WMM in web page setting.
2.	D-Link fw upgrade protection policy.
3.	Add antenna diversity.


Firmware: v2.10us-r0111
Hardware: WAPD23 REV-A1
Date: July 05, 2006

Problems Resolved:
1.	For some hardware, failed to find an attachable driver for device after reboot system.
2.	Type command "get config" first, and then type "get11g config". After that, command "get config" will become invalid.


Firmware: 2.00-r0058
Hardware: WAPD23 REV-A1
Date: September 5, 2005

Problems Resolved:
1.	Deauth all STAs if the number of assoc STA is larger than iapp user limit.
2.	Power on AP and change settings will sometimes fail.


Firmware: 2.00-r0056
Hardware: WAPD23 REV-A1
Date: August 26, 2005

Problems Resolved:
1.	DHCP client cannot get ip through WDS. (patch from Wind River)
2.	Correct the OID as follows: ipAdEntAddr of 7700 and 2700 for D-View discovery.


Firmware: 2.00-r0048
Hardware: WAPD23 REV-A1
Date: July 29, 2005

Problems Resolved:
1.	Temperature indication.
2.	Downward compatibility.


Firmware: 2.00-r0047
Hardware: WAPD23 REV-A1
Date: July 22, 2005

Problems Resolved:
1.	SSIDbroacast setting is error while updating the config file.
2.	Ban quotation mark set in ssid, passphrase.
3.	The RSSI indication in web.
4.	STA can’t get ip from DHCP server in AP.
5.	STA can’t get lease time from DHCP server in AP.
6.	Disable FTP server in AP.
7.	Add “180 secs” in telnet timeout selection.
8.	AP will reboot automatically when is asserts.
9.	ACL does not work fine with MSSID enabled.
10.	The ip address will be attached in log when telnet login successfully.

Enhancements:
1.	Support full MIB.
2.	Support AP manager.



v1.03b01

1.	AP client/AP repeater site survey.
2.	AP client searches rootap by SSID.
3.	Site survey is only available in AP client or AP repeater mode.
4.	Channel default setting in wizard is 6( substitute for 1).
5.	SSID in wizard is set to be “default”
6.	After applying site survey, rootAP’s MAC address(in AP repeater) and SSID will be filled in the required fields instead of the original MAC address and SSID.
7.	When Normal AP mode switches to AP Client mode(not apply), site
survey will perform as it does in AP Client mode.
8.	Make modifications in AP to fix the bug in AP manager.
bug description: "Press the finish button to complete the setup of the wizard. After AP reboot, the Password can’t work!!"
9.	After double click on the SSID of the site survey list, the field would not become "Blue".(like DWL-2100AP/2200AP’s style)
10.	Fix SSID setting in AP Manager.