The attached file "DFL-210config_WEB_server_on_LAN.pkg" is configuration file for 
DFL-210 Firewall. You can use this config file to load the settings described in 
the attached Setup Guide. To load the configuration file:
1. Log into your DFL-210 Firewall.
2. In the top panel click on Tools and select Backup.
3. Under Restore section click on Browse... and browse to the configuration file. Click Open.
4. Click on Upload COnfiguration.
5. Click on Activate when prompted. Wait for the configuration to be loaded. 
6. Re-login into your firewall via https://192.168.1.1 or http://192.168.1.1:88

* Note that if you will not log into the firewall withing the Validation time, the firewall
will revert to previous settings automatically.

The config file will set your firewall with the following settings:

LAN IP: 192.168.1.1
DHCP: Enabled
DHCP Pool: 192.168.1.100 - 192.168.1.200
Management: via http://192.168.1.1:88 or https://192.168.1.1 (LAN only)

WAN IP: 202.129.109.93
WAN Subnet Mask: 255.255.255.224
WAN Gateway: 202.129.109.65

NAT: Enabled

IP Rules:
Open port 80 (TCP) on WAN and redirect to 192.168.1.2 on LAN.

