DWL-3200AP Firmware Release Notes


Firmware: v2.41rc176

Problems Resolved:
1.[FW]VLAN taggeding in Primary SSID with Multicast packet fixed.
2.[FW] support VLAN tagged in Primary SSID.
3.[WEB] Closed two back door accounts. 
4.[WEB&APMII] Fixed the System Time on home page.
5.[FW] Fixed: Second radius settings have not sent to APM/APMII/DV in config file.
6.[FW] Fixed: Can’t save data rate control setting with APM/APMII/DV
7.[FW] Fixed: IAPP roaming can’t send MOVE-NOTIFY packets.
8.[FW] Fixed: AP can’t send coldstart trap, when user push the reset button.


Firmware: v2.40rc113

Problems Resolved:
1.[FW]Fixed Multi-SSID problem: when enable Multi-SSID with WPA-PSK, AP will stop services after several days
2.[WEB] Fixed: When user login with wrong user/password, they still can access some web pages
3.[WEB] Fixed: The WMM's status of Primary SSID cann't display rightly in Multi-SSID webpage
4.[WEB] Fixed: SNTP time server error
	
Enhancements:
1.Support APM-II
2.Support WMM to 802.1p mapping, VLAN tagged packet forwarding(disabled).
3.Multicast packet control, from LAN to WLAN 
4.On WEB UI, add Data Rate Control (refer to WiFi manager).
5.Support 802.11MIB
6.Support MIB-II (RFC-1213)
7.AP status on UI (also on MIB)
a)CPU and Memory utilization 
b)Statistics for Ethernet TX and RX,bytes and packets
8.Secondary RADIUS server setting
9.Trap server, settings(catagorize the types of traps)
10.Enable/Disable ping
11.Rogue AP protection
12.support IAPP(802.11f) roaming

==============================================================


Firmware: v2.30rc069
Date: Nov 14, 2006

Problems Resolved:
1.[DIAP] Modify the relative parameter of  "Ethernet Link Status" for D-View and APM.
Enhancements:
None

Firmware: v2.30rc068
Date: Nov 14, 2006

Problems Resolved:
1.Remove the "Ethernet Link Status" from WEB GUI
Enhancements:
None


==============================================================


Firmware: v2.30rc065
Date: Nov 03, 2006

Problems Resolved:
1.[WEB]adjust loyout for reboot/upgrade webpages
2.[WEB]display correct mac addresses(MSSID) in status webpages
Enhancements:



==============================================================

Firmware: v2.30rc052
Date: Oct 13, 2006

Problems Resolved:
1.[DIAP] Change the password updating method.
Enhancements:
None


==============================================================

Firmware: v2.30rc044
Date: Sep 21, 2006

Problems Resolved:
1.[Roaming]Update current AP1's association table, when STA roam to another AP2.
Enhancements:
1. New WEB GUI
2. Remove the Wizard in WEB
3. Add f/w upgrade protection policy in WEB
4. Enable/Disable SSID broadcasting for each SSID
5. Enable Load balance/Link integrity
6. WMM supported for all SSID, which can be set enable/disable
7. In log setting, add the SMTP setting functionality
8. Radius accounting support for each SSID
9. Support 64Bytes username length for radius authentication
10.Support Character Set of WEB login username, include "a~z","A~Z","0~9","@", ".", "-" and "_"
11.Support 64 character WEB login username length 
12.Pop error message when key in unsupported characters in WEB login user name
13.Add command “get/set SNMP” to control snmp state
14.Change default SSID to “dlink”;
15. Support IEEE 802.1X, the Authentication can be initiated by the Authenticator PAE(support EAPOL start frame automatically)
16.Modify the command to set passphrase directly
17.Add Telnet command “Get PassPhrase” to display passphrase of wpa-psk
18.Add Telnet command “Get RadiusSecret” to display Radius Secret
19.Add two “Limit Administrator IP” 
20.802.1x packet pass through in AP mode,when authentication type is Open/Shared key
21.Re-define the "Ethernet to WLAN Access", to block Multicast and Broadcast when enable, except DHCP’s packets
22.According output table from PP Leon, adjust output power for region below:



Firmware: v2.22rc013
Date: July 07, 2006

Problems Resolved:
None
Enhancements:
1. SuperG support “enable/disable”,when countrycode is JP.
2. Adjust the board output power for JP.
 

==============================================================


Firmware: v2.20-patch02-r0510
Hardware: 
Date: July 03, 2006

Problems Resolved:
Enhancements:
1. Support forwarding EAPOL packet with open/share.
==============================================================


Firmware: v2.20-r0476
Date: March 20, 2006

 
Problems Resolved:

1. WDS can't connect when SSID Broadcast is disabled.
2. Change Radius Secret size from 32 to 64.
3. Revised Community Public/Private "Stream" to "String". 
4. Grouping Help links fixed.
5. If SSID set to "\" , web page will give error.