DCS-850L Firmware Release Notes
=================================

**Note: a factory reset is recommended after upgrading to ensure correct configuration is applied**

Hardware: A1
Firmware: V1.02.09
Date: 24/06/2015

New Features:

1. Update mydlink agent
2. Support CGI command of auto-pan stop
3. Remove Bonjour _http service, and add Bonjour _dcamera service


Problems Resolved

1. Fixed HTTPS issue that causes Pan/Tilt and Day/Night control to not work from portal/app
2. Modified Time Zone Table list to support some time zones changes.
3. Fixed the issue that can occur when the IP Camera connects to a wireless router and its Direct Mode is also activated simultaneously, causing the wireless router to discover other IP cameras.
4. Fixed the issue where the IP Camera could not connect to a Wireless Network with a Hidden SSID.
5. Fixed CGI /reset.cgi reboot command issue





Upgrading Instructions:
Follow the steps below to upgrade the firmware:
1. Download the latest firmware file from the D-Link website. The file is in .bin file format.

For Windows:

Step 1
In the Control Panel, click Network and Internet.

 
Step 2
Click View network computers and devices.
 

Step 3
Make a note of the camera’s IP address.


Step 4
Open a web browser and enter “http://IP_Address/eng/admin/tools_firmware.cgi” in the address bar (where IP_Address is the IP address you made a note of in Step 3).


Step 5
If you do not already have the firmware file to use, follow the instructions on this page to download the latest file from the D-Link Support Page. Then click Browse… and locate the file. Finally, click the Upload button.
 





For Mac:

Step 1
Open Safari, and click Bonjour.


Step 2
Select the device you want to perform the firmware upgrade on.


Step 3
Type “/eng/admin/tools_firmware.cgi” into the address bar and press Enter.


Step 4
If you do not already have the firmware file to use, follow the instructions on this page to download the latest file from the D-Link Support Page. Then click Browse… and locate the file. Finally, click the Upload button.