****************************** Section A. UPGRADE INSTRUCTION ****************************** For users of Microsoft Windows, please run 714P+_1.33b04.EXE directly. It will search the Router on your LAN and ask you to type system password. Just type in the password and click "Upgrade" button. It takes about 30 seconds to finish the whole procedure. For users of other platforms, please refer Section D for platform-independent upgrade. ****************************** Section B. UPGRADE INFORMATION ****************************** The files will upgrade the firmware of your Cable/DSL Router to version 1.33b04. 1. NOTE! DO NOT POWER OFF THE UNIT WHEN THE UNIT IS BEING UPGRADED, OR THE UNIT MAY BE DAMAGED. 2. The configuration will not be changed. You need not configure it again. ************************* Section C. CHANGE HISTORY ************************* *** 1.33b03 TO 1.33b04 1.Fix failed items of CDRouter test. 2.Change firewall destination IP from * to real destination IP if the rule is derived from Virtual Server. 3.Support NO-IP DDNS service. 4.Support i2eye ALG. 5.Support Multi Global IP for DHCP and Static WAN type. 6.Prevent different devices from using the same XID to send DHCP request. 7.Fix the following problem: (1) Virtual Server doesn't work if public port and private port are not the same. *** 1.33b02 TO 1.33b03 1.Fix the PPPoE connection problem of v1.33b02. *** 1.33b01 TO 1.33b02 1.Fix keep alive problem of BigPond WAN connection. 2.Add D-Link web cameras(DCS-900, 1000, 2000, 3120, 5300) into default lists of Virtual Server. 3.Change firewall mechanisms. 4.Mail alert feature can support Lotus Notes server. (It's recommended to reset configuration to factory default after upgrading to this firmware.) *** 1.33 TO 1.33b01 1.Fix the disconnection problem if DWL-650+ is in power save mode. 2.Fix the problem of MAC filter if user setup more than 16 rules. 3.Protect router from DOS attack. *** 1.32b04 TO 1.33 1.Rename from 1.32b04. *** 1.32b03 TO 1.32b04 1.Fix the problem about L2TP WAN connection doesn't work in Israel. 2.Fix the connection broken problem if a wired client and a wireless client download files from a WAN FTP server simultaneously. 3.Fix the connection broken problem if two wireless clients pull files from a wired LAN host simultaneously. 4.Fix the DHCP renew problem when using BigPond WAN connection. 5.Fix the problem about mail alert function can't transfer mail with some SMTP servers. 6.Support ZIPB WAN connection. 7.Change the default connect mode to Connect-on-demand, and set the idle time to 5 minutes. (Users need to reset router setting to factory default first.) *** 1.32b02 TO 1.32b03 1.Fix the UI cache problem of L2TP configuration page if users upgrade from older firmware version. 2.Support Dynamic PPTP WAN connection. *** 1.32b01 TO 1.32b02 1.Fix UI error when users save wireless performance page. *** 1.32 TO 1.32b01 1.Fix L2TP connection problem. 2.Fix PPTP connection problem. 3.Change wireless channgel from 4-8 to 5-13 for Israel. (Users for Israel need to reset configuration to factory default after upgrading to take this change effect.) 4.Change Auto reconnect and Dial-on-demand functions. 5.Change the sender mail address of E-mail alert function to meet the rule of RFC2821. *** 1.31b02 TO 1.32 1.Rename from v1.31b02. *** 1.31b01 TO 1.31b02 1.Support WPA and WPA-PSK. *** 1.31 TO 1.31b01 1.Fix compatibility problem with Centrino NIC. 2.Fix file transfer problem between wireless client. 3.Fix the Reboot problem if SSID broadcast is disabled and DWL-650+ wants to associate it. 4.Fix the problem about users can access certain web-management page without passing authentication. 5.Fix print problem with HP PSC2510 wireless printer. 6.Fix connection broken problem when browsing online stock website. 7.Support WEP key with ASCII. 8.Support PPPoE with Relay-Session-ID. *** 1.30b04 TO 1.31 1.Rename from 1.34b04. *** 1.30b03 TO 1.30b04 1.Fix DDNS function may cause DynDNS.org abuse. A.Stop continuing to update if authentication failed. B.Add model name and firmware version into agent information. 2.Fix the link problem after changing configuration by remote host. 3.Fix SNMP counter problem. (Up to 2^32) 4.Add L2TP WAN Type. 5.Add Daylight Saving. 6.Change Domail Filter Function seat. 7.Support D-Link DCS2100+. 8.Support Ximeta NAS protocol. *** 1.30b02 TO 1.30b03 1.Fix Print Server Problem. *** 1.30b01 TO 1.30b02 1.Fix PPPoE connection Problem. *** 1.30 TO 1.30b01 1.Fix Wireless connection Problem. *** 1.23(1.22c) TO 1.30 1. First release (UI New Style). *** 1.22b TO 1.22c (20030630_1.23) 1.Add 4x enable/disable in performance setting page. 2.Only aceept 255.255.255.x (Subnet mask)in LAN setting 3.Remove non-dynamic in 802.1x. *** 1.22a TO 1.22b 1. Add 4X function.(with 802.1x) + PEAP. *** 1.22 TO 1.22a 1.Fix Wireless client list:connection tion has bug. 2.Fix Wireless unstable result in wireless disconnection. 3.Fix DHCP client list disappear after setting MAC filter. *** 1.21 TO 1.22 1.Take off 802.1x Dynamic WEP. 2.Fix Syslog dis/enable bug. *** 1.12 TO 1.21 1. Add SSID Broadcast dis/enable, default is enable. 2. Support 802.1x Dynamic WEP. 3. Fix Bug to improve stability of wireless connection. *** 1.10 TO 1.12 1. Add Scheduling function 2. Add 802.1x EAP-TLS. *** 1.10 First release.. ************************************************ Section D. Platform-independent Firmware Upgrade ************************************************ First, go to the D-Link Web site to download firmware image file, 714P+_1.33b04.BIN. Remember the location you save this file. And use the following method to upgrade: * WEB UPGRADE: 1. Connect the Web user interface and login as system administrator. 2. Click the "Firmware Upgrade" button of "Tools" page. And the "Firmware Upgrade" screen will appear. 3. Enter the location of the previously downloaded file in the text box, or click "Browse" button to search for the file. And then click "Upgrade" button.