DI-804HV Firmware Release Notes



Date: July. 23th 2008 
Firmware V1.51

Bug Fixed:
1. Removes “BigPond” of WAN connection type.
2. Changed “Dynamic IP” default value from “Disable” to “Auto-reconnect” mode.
3. Fixed MPPE Encryption mode of PPTP/L2TP issue.
4. Fixed the DHCP function cannot get IP by DHCP Relay.
5. Improved PPTP/L2TP features.
6. Changed NAT block log into Dropped Packets categorization.
7. Fixed Dynamic Routing issue.
8. Fixed send big file by web-mail when URL filter function enable.
9. Improved Time zone options
10. Enhanced Remote Manage feature.
11. Fixed IPSec NAT-Traversal keep-alive issue.
12. Fixed IPSec PFS to cause VPN tunnel cannot set up with DFL device.
13. Removes the “Interface” option from the static routing feature.
14. Fixed Device Info of Status show wrong information.
15. Added URL Blocking characters number from 30 to 50.
16. Added Domain Blocking characters number from 30 to 45.
17. Device request NTP server every 10 seconds.
18. Enhanced IGMP function through Dual Access PPTP/PPPoE connection.
19. Support PPTP/L2TP MPPE 128bit
20. Fixed ISDN Backup line issue.
21. Enhanced X-Authentication of IPSec feature.
22. Support 10 user profiles for PPTP, L2TP and L2TP over IPSec.
23. Support 30 profiles for IPSec tunnel.
24. Support Static DHCP feature and 25 profiles.
25. Support 25 profiles for Virtual Server.
New Feature:
1. Added VPN Wizard feature.
2. Added MS-CHAPv2 feature in PPTP/L2TP server.
3. Added the Clone Mac function to the Dual Access PPTP WAN type.


	2.00b14

1. Fix VPN NAT traversal issue.

	1.43

1. DI-804HV L2TP server and client reconnection fix.
2. Keepalive with ARP added. 
3. WAN IP and WAN gateway subnet check.
4. Not allow IP addresses "X.X.X.255" or "X.X.X.0" in UI.
5. Fixed VPN IP Sec DDoS Issue 1. 

	1.42b06

1. Fix: Cannot forward ports when using auto-backup function with dial-up.
2. Add the check-box " Do not change the TTL value ".
2. Add QoS function.
3. Static and dynamic VPN connection priority fix.
4. VPN Traversal fix.
5. Dynamic VPN server with Extended Authentication fix.
6. Remote Management port field added.
7. Fragment packets that are fragmented by PPTP server fix.
8. Add an “Auto-connect” option for VPN.


	1.41b07

1. Router’s WAN IP can respond “Ping” packet that is sent out by UI’s Ping tool.
2. The feature of NAT-Traversal would be enabled only if both VPN endpoints support it.
3. VPN client behind a NAT router (with IPSec passthrough) can establish IPSec tunnel with DI-804HV without setting any local ID or remote ID.
4. Add XBOX Enable/Disable option.
5. URL blocking fix.
6. Add “Active sessions” page.
7. Add local and remote ID options on VPN configuration page.
8. Support for GPRS modem.
9. Support RTP traffic pass-through.
10. Add authentication method (including Auto, PAP, CHAP, MS_CHAPv1; Default is Auto) at the Dial-up WAN configuration page.


	1.37 (Backwards compatible with rev.A)

1.Fix UI error when switch VPN configuration pages.
2.Fix mail alert function can't transfer mail with some SMTP servers
3.Replace real key value with asterisks in VPN configuration pages.  
4.Support SMTP authentication with mail alert function.

Shipped f/w 1.36