DSL-2880AL Firmware Release Notes
=================================

** After upgrading the firmware it is highly recommended that your perform a Factory Reset of the DSL-2880AL **
** This will ensure that the correct configuration is loaded from the new firmware ** 

H/W:  A1
F/W:  AU_v1.01b
Date: 13/03/2014

New Features:

1.  mydlink Lite and mydlink + apps now supported


Bug Fixes:

1.  Add enable/disable radio button to inbound filter controller
2.  Web File server cannot work with default port 8000 or no default port
3.  FTP server still works with default port 21 even after set to port 2121, and client cannot access ftp server if WAN is up
4.  SAMBA / Windows File sharing via USB port speed improvements
5.  Local System Log is functional again
6.  Corrected default name displayed in mydlink portal and apps
7.  Corrected some typos in the Setup Wizard
8.  If you cancel the Setup Wizard and then setup manually the mydlink feature would not register
9.  Corrected some typos on the DHCP Server page
10. Corrected some wording and explanations on the Storage/SAMBA page
11. Inbound Filter rule fix for DMZ and Port Forwarding features
12. NAT Loopback fixes


Known Issues:

1.  DHCP Reservation cannot assign an IP to a device that is inside the DHCP Pool
2.  DLNA Media Server is missing from this release will be in next release
3.  When configuring Port Forwarding or Virtual Server an Inbound Filter rule needs to be created for all TCP/UDP port to <blank IP>
4.  NTP cannot update time by IPv6 address or IPv6 domain server
5.  P2P/BT connection issues, poor data rate
6.  MTU for NZ is set to 0 if following the Setup Wizard, when it should be 1490
7.  USB Storage with GPT (GUID) partitions are not detected
8.  DSL LED will flash while in NBN/UFB Mode
9.  Port Forwarding port 80 to a web server might require a power cycle of the router after clicking Apply